Battery Manager Information Tab

Level

- The current battery charge level as a percentage. Displays -% when the level is unknown.

Wear

- The health of the battery in graphical form. When the wear level exceeds 80%, the bar color changes to red.

Health

- The health of the battery. If a critical error occurs, appears. Touch to view the error description.

Decommission
- The battery is past its useful life and should be replaced. See system administrator.
Good
- The battery is good.
Charge error
- An error occurred while charging. See system administrator.
Over Current
- An over-current condition occurred. See system administrator.
Dead
- The battery has no charge. Replace the battery.
Over Voltage
- An over-voltage condition occurred. See system administrator.
Below Temperature
- The battery temperature is below the operating temperature. See system administrator.
Failure Detected
- A failure has been detected in the battery. See system administrator.
Unknown
- See system administrator.

Charge Status

Not charging
- The device is not connected to AC power.
Not charging
- The device is not charging.
Charging-AC
- The device is connected to AC power and charging or is fast charging via USB.
Charging-USB
- The device is connected to a host computer with a USB cable and charging.
Discharging
- The battery is discharging.
Full
- The battery is fully charged.
Unknown
- The battery status is unknown.

Time until Full

- The amount of time until the battery is fully charged.

Time since charging

- The amount of time since the device began charging.

Time until empty

- The amount of time until the battery is empty.

Battery present status

- Indicates that the battery is present.

Battery level

- The battery charge level as a percentage of scale.

Battery scale

- The battery scale level used to determine battery level (100).

Battery voltage

- The current battery voltage in millivolts.

Battery temperature

- The current battery temperature in degrees Centigrade.

Battery technology

- The type of battery.

Battery current

- The average current into or out of the battery over the last second in mAh.

Battery manufacture date

- The date of manufacture.

Battery serial number

- The battery serial number. The number matches the serial number printed on the battery label.

Battery part number

- The battery part number.

Battery rated capacity

- Lists the rated capacity of the backup battery in mAh.

Battery decommission status

- Indicates if the battery is past its life span.

Battery Good
- The battery is in good health.
Decommissioned Battery
- The battery is past its useful life and should be replaced.

Base cumulative charge

- Cumulative charge using Zebra charging equipment only.

Battery present capacity

- Maximum amount of charge that could be pulled from the battery under the present discharge conditions if the battery were fully charged.

Battery health percentage

- With a range from 0 to 100, this is the ratio of “present_capacity” to “design_capacity” at a discharge rate of “design_capacity”.

% decommission threshold

- The default % decommission threshold for a gifted battery as 80%.

Battery present charge

- Amount of usable charge remaining in the battery at present under the current discharge conditions.

Battery total cumulative charge

- The total accumulated charge in all chargers.

Battery time since first use

- The time passed since the battery was placed in a Zebra terminal for the first time.

Battery error status

- The error status of the battery.

Battery usage number

- The health of the battery as a result of charging and discharging. A high number indicates low battery health.

Usage decommission threshold

- When the Battery usage number is greater than or equal to the Usage decommission threshold, the battery is past its useful life and should be replaced.

App version

- The application version number.