1. Accessories
  2. 2-Slot USB-Ethernet Cradle
  3. USB and Ethernet Communication
  4. Configuring Ethernet Static IP Address
Configuring Ethernet Static IP Address

Configuring Ethernet Static IP Address

The device includes Ethernet cradle drivers. After inserting the device, configure the Ethernet connection:
  1. Go to
    Settings
    .
  2. Touch
    Network & internet
    >
    Ethernet
    .
  3. Place the device into the Ethernet cradle slot.
  4. Slide the switch to the
    ON
     position.
  5. Touch
    Eth0
    .
  6. Touch
    Disconnect
    .
  7. Touch
    Eth0
    .
  8. Touch and hold the IP settings drop-down list and select
    Static
    .
  9. In the
    IP
    address field, enter the proxy server address.
  10. If required, in the
    Gateway
    field, enter a gateway address for the device.
  11. If required, in the
    Netmask
     field, enter the network mask address
  12. If required, in the
    DNS address
     fields, enter a Domain Name System (DNS) addresses.
  13. Touch
    CONNECT
    .
  14. Touch Home.