1. Data Capture
  2. Pairing a Bluetooth Scanner
  3. Pairing Using Bluetooth Human Interface Device
Pairing Using Bluetooth Human Interface Device

Pairing Using Bluetooth Human Interface Device

Pair the Bluetooth scanner to the device using HID.
To pair the scanner with the device using HID:
  1. Remove the battery from the scanner.
  2. Replace the battery.
  3. After the scanner reboots, scan the barcode below to place the scanner in HID mode.
  4. On the device, swipe down from the Status bar to open the Quick Access panel and then touch .
  5. Touch
    Bluetooth
    .
  6. Touch
    Pair new device
    . The device begins searching for discoverable Bluetooth devices in the area and displays them under
    Available devices
    .
  7. Scroll through the list and select XXXXX xxxxxx, where XXXXX is the scanner and xxxxxx is the serial number.
    The device connects to the scanner, the scanner beeps once and
    Connected
     appears below the device name. The Bluetooth device is added to the
    Paired devices
     list and a trusted (paired) connection is established.