Installing the SAM Card

Installing the SAM Card

Follow proper electrostatic discharge (ESD) precautions to avoid damaging the Secure Access Module (SAM) card. Proper ESD precautions include, but not limited to, working on an ESD mat and ensuring that the user is properly grounded.
If using a micro SAM card, a third-party adapter is required.
  1. Lift the access door.
  2. Insert a SAM card into the SAM slot with the cut edge toward the middle of the device and the contacts facing down.
    1
    Mini SAM Slot
  3. Ensure that the SAM card is seated properly.
  4. Replace the access door.
  5. Press the access door down and ensure that it is properly seated.
    Access door must be replaced and securely seated to ensure proper device sealing.