Troubleshooting the 2-Slot USB/Ethernet Cradle

Troubleshooting the 2-Slot USB/Ethernet Cradle

Troubleshooting the 2-Slot USB/Ethernet Cradle
Symptom
Possible Cause
Action
During communication, no data transmits, or transmitted data was incomplete.
Device removed from cradle during communications.
Replace device in cradle and retransmit.
Incorrect cable configuration.
Ensure that the correct cable configuration.
Device has no active connection.
An icon is visible in the status bar if a connection is currently active.
USB/Ethernet module switch in not in the correct position.
For Ethernet communication, slide the switch to the position. For USB communication, slide the switch to the position.
LEDs do not light when device or spare battery is inserted.
Cradle is not receiving power.
Ensure the power cable is connected securely to both the cradle and to AC power.
Device is not seated firmly in the cradle.
Remove and re-insert the device into the cradle, ensuring it is firmly seated.
Spare battery is not seated firmly in the cradle.
Remove and re-insert the spare battery into the charging slot, ensuring it is firmly seated.
Device battery is not charging.
Device was removed from cradle or cradle was unplugged from AC power too soon.
Ensure cradle is receiving power. Ensure device is seated correctly. Confirm main battery is charging. The 4,620 mAh battery fully charges in less than five hours.
Battery is faulty.
Verify that other batteries charge properly. If so, replace the faulty battery.
The device is not fully seated in the cradle.
Remove and re-insert the device into the cradle, ensuring it is firmly seated.
Extreme battery temperature.
Battery does not charge if ambient temperature is below 0 °C (32 °F) or above 40 °C (104 °F).
Spare battery is not charging.
Battery not fully seated in charging slot.
Remove and re-insert the spare battery in the cradle, ensuring it is firmly seated. The 4,620 mAh battery fully charges in less than five hours.
Battery inserted incorrectly.
Re-insert the battery so the charging contacts on the battery align with the contacts on the cradle.
Battery is faulty.
Verify that other batteries charge properly. If so, replace the faulty battery.