1. US Home Page
  2. RS2100 Product Reference Guide
  3. Bluetooth Communications
  4. General Bluetooth Options
  5. Using Image Capture Mode
  • RS2100 Ring Scanner Product Reference Guide
Using Image Capture Mode
Using Image Capture Mode

Using Image Capture Mode

Image Capture Mode allows the scanner to capture an image and send its binary data over an SPP connection. To use Image Catpure Mode:
The connected device uses the binary data sent by the scanner, starting from the PG signature (hex value
FF D8 FF
), to create the image file in JPG format.
  1. Change the scanner to SPP mode.
  2. Pair and connect the scanner to a host device.
  3. Enable Image Capture Mode by sending the character
    i
     to the scanner.
    The cross-hair beam illuminates, indicating that the scanner is ready to capture an image.
  4. Press the Scan trigger.
After capturing an image, the scanner
  1. Sends the data to the connected device.
  2. Exits Image Capture Mode.
  3. Returns to the previous barcode scanning mode.