1. US Home Page
  2. RS2100 Product Reference Guide
  3. User Preferences and Miscellaneous Options
  4. User Preferences
  5. Default Parameters
  • RS2100 Ring Scanner Product Reference Guide
Default Parameters
Default Parameters
View content for :
Product:
Platform:

Default Parameters

Scan one of the following barcodes to reset the scanner to its default settings.
If the RS2100 is connected to a wearable computer via an SSI Bluetooth connection, the connection prohibits the RS2100 from scanning parameter barcodes. This prohibition remains until you reboot the scanner.
To scan the default parameters barcode:
  1. Disable Bluetooth on the host device.
  2. Reboot the scanner by holding the trigger for 15 seconds.
The scanner is ready to scan a default parameters barcode.
  • Restore Defaults resets all default parameters as follows:
    • If you configured custom default parameter values via the Write to Custom Defaults barcode, scanning the Restore Defaults barcode restores these custom values.
    • If you did not configure custom default parameter values, scanning the Restore Defaults barcode restores the factory default values. Default values are available at the beginning of each section.
  • Set Factory Defaults clears all custom default values and sets the factory default values. Default values are available at the beginning of each section.
*
Restore Defaults
Set Factory Defaults
User Preferences