You can select a reconnect option for the scanner when it disconnects from a remote device:
Auto-reconnect on Barcode Data - The scanner auto-reconnects when you scan a barcode. A delay can occur when transmitting the first characters. The scanner sounds a decode beep upon barcode scan, followed by a connection, a page timeout, a rejection beep, or a transmission error beep. This option optimizes battery life on the scanner and mobile device. Note that auto-reconnect does not occur on rejection and cable unplug commands.
Auto-reconnect Immediately - When the scanner loses connection, it attempts to reconnect. If a page timeout occurs, the scanner attempts reconnect on a trigger pull. Select this option if the scanner’s battery life is not an issue and you do not want a delay when transmitting the first barcode.
Auto-reconnect does not occur on rejection and cable unplug commands.
Disable Auto-reconnect - When the scanner loses connection, you must re-establish it manually.
