1. RS6100 Product Reference Guide
  2. Bluetooth Communications
  3. BLE Beaconing
  4. Beacon Battery Threshold
  • RS6100 Wearable Scanner Product Reference Guide
Beacon Battery Threshold
View content for :
Product:

Beacon Battery Threshold

Parameter # 2407 (SSI # F8h 09h 67h)
This parameter defines the level the battery reaches when beaconing activates.
Scan one of the following codes to set the corresponding battery level. The recommended range is 0-40%.
When the scanner's battery reaches the defined level, and beaconing activates, the scanner enters a power-saving mode. In the power-saving mode:
  • pressing the trigger does not result in a scan
  • sending data to and from the host device fails
To end the power-saving mode:
  • place the scanner in a charger
  • replace the battery with one that is more fully charged
If the scanner battery reaches 0%, there is no way to send a beacon signal to recover the scanner.
1D barcode N6B9670A
10%
20%
*
30%
35%
37%
1D barcode N6B96728
40%
(Disable)
BLE Beaconing uses battery power. You will notice the battery level decreases more quickly when beaconing is enabled.