The charging cradle with radio supports two radio communication modes of scanner operation for wireless communication.
Select a mode of operation:
Point-to-Point
- Only one scanner can connect to the cradle at a time. Pair the scanner to the cradle either by inserting it into the cradle (if Pair on Contacts is enabled), or by scanning the PAIR barcode on the cradle. Communication can be locked, unlocked (default), or in a lock override state (see Pairing Modes). In locked mode, you must set a Connection Maintenance Interval to set the locking interval.
Multipoint-to-Point
- Pair up to seven scanners to one cradle. To set this mode, scan the Multipoint-to-Point barcode using the first scanner to connect to the cradle. See Parameter Broadcast (Cradle Host Only) to clone all scanners paired to the cradle after programming the first.
