The RS6100 is worn with a Single or Double Trigger Assembly on the index finger, and triggered with the thumb. The trigger assembly is removable to provide left-handed or right-handed use.
The double trigger assembly is available in standard, USB-C, and vibrator configurations. The USB-C port on the assembly allows charging the RS6100 via a USB cable and programming using 123Scan.
After installing a different type of trigger, reboot the RS6100 to recognize the new trigger.
To change the trigger position for right or left-handed use to position the scan trigger next to the thumb:
On the underside of the RS6100, push in the trigger assembly latch.
Lift the trigger assembly off the RS6100.
Rotate the trigger assembly so the scan trigger is positioned next to the thumb when the RS6100 is placed on the index finger.
Align one end of the trigger assembly on the RS6100 and push the other end down until it snaps into place.
An optional trigger mount screw is included in the packaging to secure the trigger mount using a Phillips screwdriver. On the single trigger, the hole for the trigger mount screw is under the comfort pad, while on the double trigger the hole is visible from the outside.
