Category | LED Indication | Beep Indication | Description |
|---|---|---|---|
Power Indication | Green | Low/medium/high | Device is powered on. |
Scanning Indications | Green single flash | High | Successful barcode decode. |
Red | 4x low | Transmission error. | |
Red | 5x low | Conversion or format error. | |
Red | Low/high/low/high | Out of batch memory storage. Unable to store a new barcode. | |
Radio Indications | Red/Green blinking | 6x short/high | Device in paging state. |
Blue double blink | High/low | Bluetooth communication is disconnected. | |
Blue slow blinking | None | Attempting to reconnect over Bluetooth. | |
None | Low/high | Bluetooth connection established. | |
None | Long low/long high | Bluetooth connection attempt failed. | |
Blue during beep sequence | Long low/long high/long low/long high | Bluetooth connection attempt rejected. | |
Blue slow blinking | 5x high | Attempting to reconnect over Bluetooth (disabled by default). | |
Blue blinking | 3x high | Bluetooth disconnect indication (disabled by default). | |
Battery Indications | Red | 4x short/high | Low battery. |
Red blinking | N/A | Over temperature or bad battery. | |
Green/red alternating | N/A | High, bad battery. | |
Amber | N/A | Medium | |
Amber/red alternating | N/A | Medium, bad battery. | |
Red | N/A | Low | |
Red blinking | N/A | Low, bad battery. | |
Parameter Programming | Red | Long low/long high | Input error, incorrect barcode or Cancel scanned, wrong entry, incorrect barcode programming sequence; remain in program mode. |
Green | High/low/high/low | Successful program exit with change in the parameter setting. | |
Maintenance Indications | Green slow blinking | N/A | Scanner connected to 123Scan. |
Red fast blinking | N/A | A file is transferring to the scanner (new configuration parameters or firmware) via 123Scan. | |
Red slow blinking | N/A | Firmware installation. | |
Green | N/A | Programming completed successfully (parameter changes or firmware updated) via 123Scan. |
