Troubleshooting Cradles
View content for :
Product:

Troubleshooting Cradles

Cradle Troubleshooting
Problem
Cause
Solution
Device battery is not charging.
Device was removed from cradle or cradle was unplugged from AC power.
Ensure cradle is receiving power. Ensure device is seated correctly. Confirm main battery is charging. The battery fully charges in approximately four hours.
Battery is faulty.
Verify that other batteries charge properly. If so, replace the faulty battery (see Installing the Battery)
.
The device is not fully seated in the cradle.
Remove and re-insert the device into the cradle, ensuring it is firmly seated.
Ambient temperature of the cradle is too warm or too cold.
Move the cradle to an area where the ambient temperature is between
5°C and 40 °C (41°F and 105 °F)
.
If after performing these checks the
RS6100
still experiences problems, contact the distributor or call Zebra Support. See Service Information.