1. RS6100 Product Reference Guide
  2. Resetting the RS2100
  • RS6100 Wearable Scanner Product Reference Guide
Resetting the RS2100

Resetting the RS2100

Reset the RS1200 when it stops responding to input or when reprogramming the device.
If the device is unresponsive, perform a cold boot. However, if you need to reset the scanner to scan a programming barcode, begin at step 1.
  1. Ensure the scanner is on.
  2. Scan the Set Factory Default barcode.
  3. Performing a cold boot:
  4. Press and hold the Scan Trigger for 15 seconds until the LED turns red.
  5. Release the Scan Trigger.