1. RS6100 Product Reference Guide
  2. User Preferences and Miscellaneous Options
  3. User Preferences
  4. Trigger Mode
  • RS6100 Wearable Scanner Product Reference Guide
Trigger Mode

Trigger Mode

Parameter #
138
  (SSI # 8Ah)
This parameter allows you to change your scanner's behavior to initiate a decode.
Choose one of the following to select a trigger mode for the scanner:
  • Standard (Level) - A trigger press activates decode processing. Decode processing continues until the barcode decodes, you release the trigger or the Decode Session Timeout occurs. If the trigger is released before the timeout expires, the decode session terminates and no decode occurs.
  • Two Stage Option 1 -Upon trigger pull, the aiming pattern appears. When the trigger is released, the scanner activates decode processing, using the currently configured decode session timeout. If the trigger is pulled again while in a decode session, the session is terminated and the aimer appears.
  • Two Stage Option 2 -Upon trigger pull, the aiming pattern appears. When the trigger is released, the aiming pattern turns off. Pulling the trigger twice quickly activates decode processing, until the trigger is released.
*Standard (Level) (0)
Two Stage Option 1 (14)
Two Stage Option 2 (15)