1. Bluetooth Communications
  2. Scanner(s) to Cradle Support
  3. Auto Un-Pairing
Auto Un-Pairing

Auto Un-Pairing

Parameter #
1708
The auto un-pair parameter configures the RS6100 to un-pair from the host computer on specific events.
  • Disable (default)
     - the RS6100 will not auto un-pair on any events.
  • On cradle insertion
     - the RS6100 will un-pair when inserted charging cradle.
  • On reset
     - the RS6100 will un-pair if a warm or cold reset occurs.
  • On cradle or reset
     - the RS6100 will un-pair on cradle insertion or reset event.
*Disable
Un-pair on Cradle Insertion
On Reset
On Cradle or Reset