Pairing is the process by which a scanner initiates communication with a cradle.
Scanning Multipoint-to-Point activates multi-scanner-to-cradle operation and allows up to seven scanners to pair.
To pair the scanner with the cradle, scan the pairing barcode on the cradle. The scanner emits a high/low/high/low beep sequence to indicate that it decoded the pairing barcode and then a low/high beep when it establishes a connection with the cradle.
Each cradle uses a unique pairing barcode.Do not scan data or parameters until pairing completes.When the scanner pairs with the cradle in SPP Central or Cradle Host mode, it attempts to reconnect to a remote device upon a disconnection due to the radio losing communication. For more information, see Auto Reconnect Parameters.
