1. Maintenance
  2. Clean the Printer
  3. Options for Cleaning the Cutter and Label Dispenser
  4. Cleaning the Label Dispenser
Cleaning the Label Dispenser

Cleaning the Label Dispenser

1
Peel bar
2
Pinch roller
3
Label-taken sensor
4
Ridges
  1. Open the door and clean the peel bar (1), the inner surfaces, and the ridges on the door (4).
  2. Wipe the roller (2) while rotating it. Discard the swab or cloth and clean again to remove any residue.
  3. Clean any streaks and residue on the label-taken sensor (3) window.