Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
Tools
Activating Advanced Mode
Manual Print Width Adjustment
Manual Print Width Adjustment
Manual Print Width Adjustment
You can manually adjust the print width for your printer depending on your printing needs.
Place the printer in Advanced mode. See
Activating Advanced Mode
. Then press
PAUSE
(
) while the Pause indicator (
) lights up yellow.
The printer prints a 16 mm (0.63 in.) box, pauses momentarily, prints a slightly larger box, and pauses again, and so on.
When you see the printer print a box that matches the width of your media, press
FEED
(
) to select that print width and return the printer to Ready state for printing.
To return to the maximum print width setting, refrain from pressing
FEED
(
) and allow the printer to proceed until it reaches that width.
Activating Advanced Mode
) while the Pause indicator ( 
) lights up yellow.
) to select that print width and return the printer to Ready state for printing.) and allow the printer to proceed until it reaches that width.
