Completing Setup Using a Configuration Script

Completing Setup Using a Configuration Script

If you opted to send a ZPL script to the printer (through the port you selected in the setup wizard) to complete the setup, use these steps.
  1. Verify that the printer is connected to the computer through the wired cable connection to port you selected (USB or Serial).
  2. If you have not already done so, turn printer power ON.
  3. On the Review and Send ZPL for Wireless window, click
    Finish
    .
    The printer sends the ZPL script to the printer through the selected port. The Wireless Setup Wizard screen closes.
  4. Turn printer power OFF and then back ON to complete the setup.