1. ZD888TA/ZD230TA Thermal Transfer Desktop Printer User Guide
  2. Setup
  3. Connecting Your Printer to a Device (Process Overview)
  • ZD888TA/ZD230TA Thermal Transfer Desktop Printer User Guide
Connecting Your Printer to a Device (Process Overview)
View content for :
Product:

Connecting Your Printer to a Device (Process Overview)

Your printer supports the Universal Serial Bus (USB 2.0) interface—Standard (see Interface Cable Requirements.
  1. Your printer supports the Universal Serial Bus (USB 2.0) interface—Standard (see Interface Cable Requirements
  2. Switch printer power OFF (see POWER Button).
  3. Connect the printer to the computer or device you will use to manage the printer using the USB port.
  4. Run Zebra Setup Utilities (ZSU) from your central device (see Running the Printer Installation Wizard).
    The central device may be a Windows PC or laptop running the operating systems listed in Setup for Windows OS. The supported printer connection option is USB.
    Zebra Setup Utilities (ZSU) are designed to assist you with installing these interfaces. (For ZSU user guides, go to zebra.com/setup.)
    Wait to turn printer power ON until you are instructed to do so by the Installation Wizard. Keep the power switch in the OFF position when attaching the interface cable. The power cord must be inserted into the power supply and the power receptacle on the back of the printer before you connect or disconnect the communications cables.
    The ZSU wizard installs the Zebra Windows drivers.
  5. When the ZSU installation wizard prompts you do to so, turn printer power ON, then follow the on-screen instructions to complete the printer setup.