1. Site Preparation and Installation
  2. Installing Components
  3. Installing the Customer Facing Scanner
  4. Replacing the Filler Cap
Replacing the Filler Cap

Replacing the Filler Cap

After installing the CFS bracket, replace the MP72 filler cap with the CFS filler cap.
The CFS kit includes left and right filler caps. Select the correct one according to the CFS mounting side, as shown in Step 3.
  1. Remove the MP72 filler cap T7 mounting screw.
  2. Remove the MP72 filler cap.
  3. Insert the CFS filler cap and hold in place.
  4. Install the filler cap T7 screw and tighten using 0.23 Nm +/- 0.03  (2 in-lb +/- 0.25) torque until the filler cap is fully seated.