1. APK Installation
  2. Device Installation
  3. Copying Files Manually in StageNow
Copying Files Manually in StageNow

Copying Files Manually in StageNow

This method requires you to manually copy the required ZAMS files in the device folder of the extracted ZIP file to the internal storage of the mobile device and then use the StageNow application on the mobile device to complete the installation.
See Installation Prerequisites and Cabinet and Device Configuration Files to learn how to download the appropriate APK and configuration files from zebra.com/support.
  1. Copy the following files into the
    /sdcard/Download
     folder in the mobile device:
    • AmsDevice.apk
    • Cabinet-device.config
    • dwprofile_AmsDevice.db
    • dwprofile_amsPin.db
    • dwprofile_code128_barcode_profile.db
      .
    • ZamsDeviceA10Permission.xml
    • ZamsDeviceA11Permission.xml
    • ZamsDeviceAutoInstall.xml
  2. Open the
    StageNow
     application on the mobile device.
    Device StageNow screen
  3. For a KIOSK:
    • With an Android 13 operating system, open the
      A13_ ZamsDeviceAutoInstall
       PDF file from the extracted zipped file.
    • With an operating system below Android 13, open the
      ZamsDeviceAutoInstall
       PDF file from the extracted zipped file.
  4. Scan the barcodes in this PDF file using the StageNow application to automatically install and configure the ZAMS application on the KIOSK.
    Device StageNow barcodes
    ZAMS is now installed on the mobile device.
    See step 5 in Downloading the Latest ZAMS Software to locate the PDF file.