Feature | Default Configuration | Supported Configuration | Recommended for Voice |
---|---|---|---|
State11d | Country selection set to Auto |
| Default |
ChannelMask_2.4 GHz | All channels enabled, subject to local regulatory rules. | Any individual channel can be enabled or disabled, subject to local regulatory rules. | Device Mask matches the exact set of network side operating channels configuration. It is recommended to configure both the device and the network to a reduced set of channels 1, 6, and 11, if WLAN SSID is enabled on 2.4 GHz. |
ChannelMask_5.0 GHz | All non-dynamic frequency selection (DFS) channels enabled, subject to local regulatory rules. | Any individual channel can be enabled or disabled, subject to local regulatory rules. | Device Mask shall match the exact set of network side operating channels configuration. It is further recommended to configure both the device and the network to a reduced set of only non-DFS channels. For example, in North America, configure the network channels to 36, 40, 44, 48, 149, 153, 157, 161, 165. |
Band Selection | Auto (both 2.4 GHz and 5 GHz bands enabled) |
| 5 GHz |
Band Preference | Disabled |
| Enable for 5 GHz, if WLAN SSID is on both bands. |
Wi-Fi Sleep Policy | Never |
| Default |
Open Network Notification | Disabled |
| Default |
Advanced Logging | Disabled |
| Default |
User Type | Non-Restricted |
| Default |
FT | Enabled |
| Default |
FT Over The DS | Enabled |
| Default |
OKC | Enabled |
| Default |
PMKID | Disabled |
| Default |
Power Save (PS) Note: The default PS of the device side does not require PS config change on the network side. | NDP (Null data power save) |
| Default |
11k | Enabled |
| Default |
Subnet Roam | Disabled |
| Default |
11w | Disabled |
| Default |
Channel Width | 2.4 GHz - 20 MHz 5 GHz - 20 MHz, 40 MHz and 80 MHz | Not configurable | Default |
11n | Enabled |
Note: Disabling this also disables 11ac. | Default |
11ac | Enabled |
| Default |
11v | Disabled |
| Enable |