Solutions
Products
Support and Downloads
About Zebra
WS50/WS50 RFID Quick Start Guide
WS50/WS50 RFID Quick Start Guide
Device Features
Converged Scanner Features
Wrist Mount Features
Setting Up the Device
Installing the Battery
Installing the Battery for the WS50 RFID Converged Scanner
Installing the Trigger and Shell Assembly for the Converged Scanner
Changing the Trigger Position for the Converged Scanner
Installing the Back of Hand Mount
Assembling the Back of Hand Mount with the External Antenna
Installing the Wrist Mount Assembly
Assembling the Wrist Mount
Removing the Trigger and Shell Assembly
Removing the Wrist Mount Assembly
Replacing the Battery
Removing the WS50 RFID Battery
Charging the Device
Charging the Main Battery
Charging the Spare Battery
Charging Indicators
Charging Temperature
2-Slot Charge Only Cradle
10-Slot Charge Only Cradle
5-Slot Ethernet Cradle with Battery Charger
4-Slot Battery Charger
20-Slot Battery Charger
USB Charge Cable
Ergonomic Recommendations
Assembling the Wrist Mount
Assembling the Wrist Mount
Assembling the Wrist Mount
This section describes how to assemble the wrist mount.
Open the antenna pocket and insert the cable into the pocket slot. Squeeze the strap to allow the cable to pass through.
Feed the cable through the pocket slot and out the shaped cutout. For right-handed units, use the tab to secure the cable in place.
Orient the antenna to match the image on the pocket, and then insert the antenna into the pocket.
Attach the mounting plate to the wrist strap.
Connect the cable to the mounting plate. For right-handed units, gently bend the cable backward and connect.
Roll any excess cable under the antenna and close the pocket with the hook and loop closure.
Pass the end fastener of the wrist strap through the narrow opening, and then snap the fasteners together.
Attach the wrist strap, and then turn the knob to tighten it.
Attach the core device to the mounting plate.
Setting Up the Device