Connection
Wired
Wired IP Protocol

This parameter indicates if the user (permanent) or the server (dynamic) selects the wired print server’s IP address. When a dynamic option is chosen, this parameter tells the method(s) by which this print server receives the IP address from the server.

You must reset the print server to allow changes to the network settings to take effect. See

Connection

Networks

Reset Network

Accepted values:: ALL, GLEANING ONLY, RARP, BOOTP, DHCP, DHCP & BOOTP, PERMANENT
Related ZPL command(s):: ^ND
SGD command used:: internal_wired.ip.protocol
Printer web page:: View and Modify Printer Settings
Network Communications Setup
TCP/IP Settings