RS-232 Interface Connection
RS-232 Interface Connection
View content for :

RS-232 Interface Connection

To connect to an RS-232 host:
  1. Attach the modular connector of the RS-232 interface cable to the
    host port as described in Connecting Cables to the SM72.
  2. Connect the other end of the RS-232 interface cable to the serial port on the host.
  3. Optionally connect a hand-held auxiliary scanner to the aux port.
  4. If connecting an auxiliary scanner, connect the power supply to the power port and an AC outlet.
  5. The scanner automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, select another RS-232 host type by scanning the appropriate barcode from RS-232 Host Types.
  6. To modify any other parameter options, scan the appropriate barcodes in this guide.
If problems occur with the system, see Troubleshooting.