Load the Combined Hex File
Load the Combined Hex File

Load the Combined Hex File

Now that the hex files are generated, the combined hex file can be downloaded onto the processor over ST-Link probe using the STM32 ST-Link Utility.
  1. Verify that the ST-Link probe is connected as described in Hardware Setup.
  2. Select
    Target
     >
    Connect
    .
    The probe gets connected to this utility. If the connection is not successful, you will see an error message.
  3. Select
    File/Open file
     and open the combined hex file to be programmed. Based on the example, it would be
    CAAFIP04-002-R00M0.hex
    .
  4. Select
    Target
     >
    Program/Verify
     and click
    Start
    . Wait for the software to download.
  5. Once the software is downloaded, select
    Target
     >
    Disconnect
     to disconnect from the utility.