Solutions
Products
Support and Downloads
About Zebra
WBA OpenRoaming on Zebra Android Devices Integrator Guide
WBA OpenRoaming on Zebra Android Devices Integrator Guide
Introduction
Supported Zebra Devices
OpenRoaming Identity Providers List
Connecting a Cisco OpenRoaming Profile with a Zebra Device
OpenRoaming Configuration on a Cisco Network
References and Configuration Guides
Connecting a Cisco OpenRoaming Profile with a Zebra Device
Connecting a Cisco OpenRoaming Profile with a Zebra Device
Connecting a Cisco OpenRoaming Profile with a Zebra Device
Connect the Zebra device to any Internet-enabled Wi-Fi or use a cellular SIM with an active data connection on the device.
Log in to the Google Play store with Google credentials and install the OpenRoaming application:
https://play.google.com/store/apps/details?id=com.cisco.or&hl=en_US&gl=US
When installation completes, open the OpenRoaming application, select an option based on the AP location, and tap
Continue
. For example, select
Outside EU region
if you are connecting to an AP in the US.
Select whether to continue with a Google ID or an Apple ID.
Select the
I Accept OpenRoaming T&C & Privacy Policy
checkbox and tap
Continue
.
Enter the Google ID and credentials for identity verification.
Tap
Allow
to allow suggested Wi-Fi networks. If using a cellular connection, the Zebra device auto-connects to the OpenRoaming WLAN profile.
If not using a cellular connection, go to Wi-Fi settings. The Zebra device auto-connects to the
OpenRoaming
SSID in the Wi-Fi scan list when you disconnect from the current WLAN profile.