Installing the Presentation Back

Power off the device before installing or removing the Presentation back.

Do not use any tools for battery cover removal. Puncturing the battery or seal may cause a hazardous condition and a potential risk of injury.

Remove battery cover and store in safe place.

Insert the tabbed end of the Presentation back into the slots in the battery well (1).

Rotate the cover down (2).

Carefully press down around the edges of the cover. Make sure that the cover is seated properly.

Using a T5 Torx screwdriver, secure the Presentation back to device using four M2 screws. Torque to 0.43N-m.