Installing the Hand Strap on the Back of the Device
Installing the Hand Strap on the Back of the Device

Installing the Hand Strap on the Back of the Device

This section provides information for installing the hand strap on the back of the device.
  1. Align the upper and lower hand strap mounting holes with the screw holes on the device.
  2. Using a T6 Torx screwdriver, secure the upper and lower hand strap to the device using the one M2x6 screw (2), one M2.5x11 screw (4), and two washers (1, 3).
    secure hand strap to device
  3. Torque the screws to 20 N-cm (1.77 lb in).
  4. Feed the lower half of the hand strap through the upper half.
    feed lower strap into upper strap
  5. Position the hand strap for the right fit.
  6. Align the stud with a hole in the lower half.
  7. Press the lower hand strap down until the stud comes through the hole.
    press strap onto stud