Installing the Hand Strap on the Side of the Device

This section provides information for installing the hand strap on the side of the device.

To install the hand strap on the side of the device:

Align the upper and lower hand strap mounting holes with the screw holes on the device.

Using a T6 Torx screwdriver, secure the upper and lower hand strap to the device using the two M2.5x11 screws (2), and two washers (1).

Torque the screws to 20 N-cm (1.77 lb. in).

Feed the lower half of the hand strap through the upper half.

Position the hand strap for the right fit.

Align the stud with a hole in the lower half.

Press the lower hand strap down until the stud comes through the hole.