1. ZEC500 Quick Start Guide
  2. Setting Up The Device
  3. Powering the Device
  4. Powering the Device with Power over Ethernet (PoE)
  • ZEC500 Quick Start Guide
Powering the Device with Power over Ethernet (PoE)
View content for :
User:

Powering the Device with Power over Ethernet (PoE)

This section explains how to power the device using Power over Ethernet.
This applies only to the ZEC500-P.
The PoE accessory must be compliant with 802.3at/bt standards and classified as Class 4 or higher Power Sourcing Equipment (PSE).
Ensure your network provides enough energy to power the device. Refer to the PoE-capable network switch or Power Injector Configuration Guide and the
Power over Ethernet section in the ZEC500 Enterprise Computer Product Reference Guide
 for more information.
  • Connect the Ethernet cable to the PoE accessory (1), and connect the Ethernet cable to the device's Ethernet port (2).
    Depicting Ethernet connection
Avoid excessive disconnecting/reconnecting the RJ45 on a PoE system to minimize electrical arcing on the RJ45 connector.