1. MC9400/MC9450 Quick Start Guide
  2. Replacing the Battery
  • MC9400/MC9450 Mobile Computer Quick Start Guide
Replacing the Battery

Replacing the Battery

This section describes how to replace the battery in the device.
  1. Push in the two primary battery release latches.
    The battery ejects slightly. With Hot Swap mode, when you remove the battery, the display turns off, and the device enters a low-power state. The device retains RAM data for approximately 5 minutes. Replace the battery within 5 minutes to preserve memory persistence.
  2. Push in the secondary battery release latches on the sides of the battery.
  3. Remove the battery from the battery slot.
  4. Align the battery with the battery slot.
  5. Push the battery into the battery slot.
  6. Press the battery firmly into the battery well.
    Ensure that both the battery release latches on the sides of the device return to the home position. You will hear an audible click sound indicating that both the battery release latches have returned to the home position, locking the battery in place.
  7. Press
    Power
     to turn on the device.