About This Guide

Best Practices for Voice Deployment with Extreme Networks WLAN Infrastructure

Best Practices for Voice Deployment with Extreme Networks WLAN Infrastructure
About This Guide
Device Settings
- Default, Supported, and Recommended for Voice Device Settings
- Device Wi-Fi Quality of Service (QoS) Tagging and Mapping
Network Settings and Device RF Characteristics
- Recommended Environment
- Device RF Capabilities
Infrastructure and Vendor Model Recommendations
- General WLAN Recommendations
  - WLAN Infrastructure Recommendations for Voice Support
  - Extreme Networks Infrastructure Recommendations for Voice Quality
- Zebra Recommended WLC, AP Models, and Firmware Versions

About This Guide

This guide provides recommendations for voice deployment using the following mobile computers, where the WLAN network employs access point hardware of up to dual-band (2.4GHz, 5GHz).

Mobile devices listed in the WiFi6E column in the following table seamlessly operate and connect as a WiFi6 device in a WLAN of dual-band APs.

Zebra Mobile Devices Supporting Extreme Networks WLAN Voice Deployment
Device Type	Devices with dual-band radio (2.4GHz, 5GHz) supporting WiFi5 (11ac)	Devices with dual-band radio (2.4GHz, 5GHz) supporting WiFi6 (11ax)	Devices with tri-band radio (2.4GHz, 5GHz, 6GHz) supporting WiFi6E (11ax with 6GHz)
Handhelds	2x2 MU-MIMO with DBS : TC52, TC52x, TC72, TC57, TC57x, TC77, TC83, EC30, EC50, EC55, MC3300x, MC9300, PS20 1x1 MU-MIMO : TC21, TC26, MC27, MC22, *MC20, RZ-H271	2x2 MU-MIMO : TC52ax, MC3300ax	2x2 MU-MIMO with DBS : TC53, TC53e, TC53e-RFID, TC73, TC58, TC58e, TC78, MC3400, MC9400, MC9450, PS30, TC22, TC27
Handhelds for Healthcare	2x2 MU-MIMO with DBS : TC52-HC, TC52x-HC 1x1 MU-MIMO : TC21-HC, TC26-HC	2x2 MU-MIMO : TC52ax-HC	2x2 MU-MIMO with DBS : HC50, *HC20
Wearables	2x2 MU-MIMO with DBS : WT6300		2x2 MU-MIMO with DBS : WT6400, WT5400
Tablets	2x2 MU-MIMO with DBS : ET51, ET56, L10A	2x2 MU-MIMO : ET40, ET45 ET40-HC, ET45-HC	2x2 MU-MIMO with DBS : ET60, ET65
Vehicle Mounted and Concierge	2x2 MU-MIMO with DBS : VC8300, CC600, CC6000
The terms MU-MIMO (Multi-User Multi-Input-Multi-Output) and DBS (Dual Band Simultaneous) are detailed in Device RF Capabilities. Devices without “” support full Enterprise quality experience out of the box and include all device WiFi configurability options. Devices with “” require a Zebra mDNA license for full Enterprise quality experience and configurability.