Device Settings

Best Practices for Zebra Enterprise Wi-Fi 7 Android Devices in HPE Aruba WLAN Infrastructure

Device Settings

This section describes important settings to understand when deploying Zebra Wi-Fi 7 devices.

For detailed settings, refer to the Zebra Wi-Fi Manager.

In the ET401 devices, some settings are supported either by the ET401 Enterprise model from the factory or by upgrading the ET401 Professional model with an Enterprise license, but it is not supported by the ET401 Professional model. See the Overview section for a list of parameters that are not configurable by the Professional model.

Device Settings
Feature	Default Configuration	Supported Configuration	Recommended Configuration
2.4 GHz Channels	1-13	1-13	As default
5.0 GHz Channels	(36-48), (52-64), (100-144), (149-165)	(36-48), (52-64), (100-144), (149-165)	As default
6.0 GHz Channels	(1-93), (97-113), (117-181), (185), (189-233)	(1-93), (97-113), (117-181), (185), (189-233)	As per the country-specific allowed PSC channels.
RF Band Selection	Auto/all bands	Auto/all bands 2.4 Ghz 5 Ghz 6 Ghz 2.4 Ghz and 5 Ghz 2.4 Ghz and 6 Ghz 5 Ghz and 6 Ghz	As default
Band Preference	Prefer 6.0 GHz or 5.0 GHz	Prefer 5 GHz Prefer 2.4 GHz Prefer 5 GHz or 6 GHz Prefer 5 GHz over 6 GHz Disable	As default
Power Save Mode	NDP	Always active (CAM) WMM-PS Null Data Power Save (NDP) PS-POLL TWT	As default
802.11k	Enable 802.11k Lite	Disable Enable 802.11k Lite Enable 802.11k Full	As default
802.11w	Capable	Optional (Capable) Disable	As default
802.11v	Enabled	Enable Disable	As default
PMKID	Disable	Enable Disable	As default
OKC	Enabled	Enable Disable	As default
Fast Transition (FT)	Enabled	Enable Disable	As default
FT Over DS	Enabled	Enable Disable	As default
Channel Width	Disabled	20/40/80/160/320	Not configurable
Call Admission Control	Enabled	Enable Disable	As default
FTM Enable	Enabled	Enable Disable	As default