1. Wireless Analyzer Administrator Guide for Android
  2. Using Features
  3. Connection Analysis
  4. Connection Analysis Settings
  • Wireless Analyzer Administrator Guide for Android
Connection Analysis Settings

Connection Analysis Settings

Tap and select 
Connection Analysis Settings
. By default, analysis runs on the connected WLAN network.
Connection Analysis Settings
To select a different network:
  1. Tap . A list of previously saved networks displays.
  2. Tap
    Network
    .
  3. Select
    OK
    .
  4. Select
Session Name: The Connection Analysis test session is saved to the Analyzer database with a prefix (for example, “wa” shown, can be configurable) appended with date & time stamp. The results of the session are loaded and viewed in the previous Result Detailed page, by pressing on that page.
A reachability test is performed by default to the connection’s Gateway IP address. To configure a remote destination that is not the Gateway IP, such as any remote IP address, URL, or Fully Qualified Domain Name (FQDN):
  • Tap the switch next to
    Use Gateway IP of SSID Network
    .
  • Enter the remote IP, URL, or FQDN.
  • Select .