Off |
The scanner is not charging. The RS2100 is incorrectly inserted. Charger is not powered. Check the power cable and the power supply. |
|
Solid Green |
Scanner charging is complete. |
Fast Blinking Red
(2 blinks/second) | Charging error, such as:
Battery temperature is too low or too high for charging. The battery has reached the charge cycle time-out period. Battery charging has gone on too long without completing a full charge cycle (typically eight hours).
|
Charge batteries in temperatures from 5°C to 40°C (41°F to 105°F). The standard battery charges from 0% to 90% in less than two and a half hours at room temperature. When the charging temperature is between 5°C to 10°C (41°F to 50°F), the standard battery charges in less than five hours.
The device and charger monitor battery temperature. Battery charging is only performed when the battery is within safe charging temperature limits. At higher temperatures (at approximately +35 °C (+95 °F) the device or charger may, for small periods of time, alternately enable and disable battery charging to keep the battery at acceptable temperatures. This process may increase charging time. The
RS2100
indicates when charging is disabled due to abnormal temperatures via the Status LED.
