1. RS6100 Quick Start Guide
  2. Bluetooth Connection
  3. Pairing with NFC
  • RS6100 Wearable Scanner Quick Start Guide
Pairing with NFC

Pairing with NFC

The
RS6100
 is NFC-enabled and supports Bluetooth Tap-to-Pair.
To connect with an NFC-enabled device such as the WT6300 or TC52:
  1. Ensure NFC is enabled on the device.
  2. Align the NFC icon on the
    RS6100
     with the NFC icon on the device.
    The Status LED blinks blue, indicating that the
    RS6100
     is attempting to establish a connection with the device. When a connection is established, the Status LED turns off, and the
    RS6100
     emits a single string of low/high beeps.
Not all Zebra devices support NFC readers and the Tap-to-Pair feature.