Power Failure Recovery Mode Jumper (OFF by Default)
Power Failure Recovery Mode Jumper (OFF by Default)
Power Failure Recovery Mode Jumper (OFF by Default)
All printer connectivity modules have a power failure recovery jumper which is set to the OFF position by default.
You can set the jumper to On to make the printer automatically power ON when it is plugged into an active AC power source. To activate the mode, see Setting the Power Failure Recovery Mode Jumper.
Power Failure Recovery Mode is available ONLY on printers that have a printer connectivity module installed.
For detailed information on power ON and power OFF modes and behaviors, see Operator Controls:
