Printing the Printer Configuration Report (CANCEL Self Test)

Printing the Printer Configuration Report (CANCEL Self Test)

The Configuration Report diagnostic procedure prints a set of printer and network configuration reports.
  1. Make sure media is loaded, the printer cover is closed, and printer power is ON.
  2. If printer power is OFF, press and hold
    CANCEL
    ( ) and turn printer power ON. Hold the button down until the Status indicator is the only indicator lit.
  3. With printer power ON, press
    FEED
    ( ) and
    CANCEL
    ( ) for two seconds.
    The printer outputs the Printer Configuration and Network Configuration reports, and returns to Ready state.
    When the Wi-Fi and Bluetooth Classic wireless connectivity option is installed on your printer, iOS devices can connect to your printer with Bluetooth Classic 4.x (with 3.0 compatibility). The Bluetooth section of the Network Configuration report reads
    supported
    .
    Some ZD series printers only have the Bluetooth LE (without Wi-Fi and classic Bluetooth). If that is the case or the wireless connectivity option is NOT installed, the iOS setting in the Bluetooth section of the Network Configuration report reads
    not supported
    .