1. ZT231/ZT231R Industrial Printer User Guide
  2. Printer Setup
  3. Connecting the Printer to a Device
  4. Installing Drivers and Connecting to a Windows-Based Computer
  5. Connecting the Printer to Your Wireless Network
  • ZT231/ZT231R Industrial Printer User Guide
Connecting the Printer to Your Wireless Network
View content for :
Product:

Connecting the Printer to Your Wireless Network

If you wish to use the printer’s optional wireless print server, you may need to configure the printer to communicate with your Wireless Local Area Network (WLAN) through the wireless print server.
For additional information about Zebra print servers, refer to the ZebraNet Wired and Wireless Print Server User Guide. To download the latest version of this guide, go to zebra.com/manuals.
  2. If necessary, specify the ESSID value that matches the value used by your wireless router. Check with your network administrator for the ESSID value to use. See Connection > Networks > ESSID for ways to change the value.
  3. If necessary, configure the following printer settings. Contact your network administrator for the proper values for your network.
  4. Reset the network (see Connection > Networks > Reset Network) to allow changes to the network settings to take effect.
  5. If the printer still does not connect, consider setting a static IP address by configuring the following additional settings, and then reset the network again. Contact your network administrator for the proper values for your network.