Tear-Off (default setting)
|
Use for most applications. This mode can be used with any printer options and most media types.
|
The printer prints label formats as it receives them. The printer operator can tear off the printed labels any time after they print.
|
Roll media in Tear-Off mode
(shown using thermal transfer media with ribbon loaded)
Fanfold media in Tear-Off mode
(shown using direct thermal media and no ribbon)
|
|
Use if the printer has the Peel‑Off option or the Liner Take-Up option. The Liner Take-Up option is available only on the ZT230 printer.
|
The printer peels the label from the liner during printing and then pauses until the label is removed. The liner exits the front of the printer.
In Peel-Off mode, the liner exits the front of the printer. In Peel-Off mode with Liner Take-Up, the liner winds onto the Liner Take-up spindle or the rewind spindle.
|
(shown without a ribbon system)
Peel-Off mode with Liner Take-Up*
(shown using direct thermal media and no ribbon)
|
|
Use if the printer has a cutter option when you want the labels to be cut apart.
|
The printer prints a label and then cuts it free.
|
(shown using direct thermal media and no ribbon)
|