Network Setting | Description | |
|---|---|---|
Active Print Server | Only one print server (wired or wireless) can be installed at a time. Therefore, the print server installed is the active print server. | |
User menu item: * * This menu item cannot be modified from the control panel. | Main Menu >  NETWORK  | |
Primary Print Server | Only one network (wired or wireless) can be connected to at any given time. Therefore, the network configured is the primary network. | |
User menu item: * * This menu item cannot be modified from the control panel. | Main Menu > NETWORK  | |
Primary TCP/IP Port | View the Ethernet TCP port number, over which labels and commands can be sent for processing. | |
User menu item: * * This menu item cannot be modified from the control panel. | Main Menu > NETWORK  | |
Alternate TCP/IP Port | View the alternate Ethernet TCP port number, over which labels and commands can be sent for processing. | |
User menu item: * * This menu item cannot be modified from the control panel. | Main Menu > NETWORK  | |
IP Address | View and, if necessary, change the printer’s IP address. To save changes to this setting, set IP Address (listed in this table) to PERMANENT, and then reset the print server. See Reset Network in this table. | |
User menu item: | Main Menu > NETWORK   | |
Accepted values: | 000 to 255 for each field | |
Related ZPL command(s): | ^ND | |
SGD command used: | Wired: internal_wired.ip.addr Wireless: ip.addr, wlan.ip.addr | |
Printer web page: | ||
Subnet Mask | View and, if necessary, change the subnet mask. To save changes to this setting, set IP Protocol (listed in this table) to PERMANENT, and then reset the print server. See Reset Network (listed in this table). | |
User menu item: | Main Menu > NETWORK 
 | |
Accepted values: | 000 to 255 for each field | |
Related ZPL command(s): | ^ND | |
SGD command used: | Wired: internal_wired.ip.netmask Wireless: wlan.ip.netmask | |
Printer web page: | ||
Gateway | View and, if necessary, change the default gateway. To save changes to this setting, set IP Protocol (listed in this table) to PERMANENT, and then reset the print server. See Reset Network (listed in this table). | |
User menu item: | Main Menu > NETWORK 
 | |
Accepted values: | 000 to 255 for each field | |
Related ZPL command(s): | ^ND | |
SGD command used: | Wired: internal_wired.ip.gateway Wireless: wlan.ip.gateway | |
Printer web page: | ||
IP Protocol | This parameter tells if the user (permanent) or the server (dynamic) selects the IP address. When a dynamic option is chosen, this parameter tells the method(s) by which the wired or wireless print server receives the IP address from the server. | |
User menu item: | ain Menu > NETWORK   | |
Accepted values: |
| |
Related ZPL command(s): | ^ND | |
SGD command used: | Wired: internal_wired.ip.protocol Wireless: wlan.ip.protocol | |
Printer web page: | ||
MAC Address | View the Media Access Control (MAC) address of the print server that is installed in the printer (wired or wireless). | |
User menu item: | Main Menu > NETWORK   | |
SGD command used: | Wired: internal_wired.mac_addr Wireless: wlan.mac_addr | |
Printer web page: | ||
ESSID | The Extended Service Set Identification (ESSID) is an identifier for your wireless network. This setting, which cannot be modified from the control panel, gives the ESSID for the current wireless configuration. | |
User menu item: | Main Menu > NETWORK  | |
Accepted values: | 32-character alphanumeric string (default 125) | |
SGD command used: | wlan.essid | |
Printer web page: | ||
Channel | View the wireless channel being used when the wireless network is active and authenticated. | |
User menu item: | Main Menu > NETWORK  | |
SGD command used: | wlan.channel | |
Printer web page: | ||
Signal | View the wireless signal strength when the wireless network is active and authenticated. | |
User menu item: | Main Menu > NETWORK  | |
SGD command used: | wlan.signal_strength | |
Printer web page: | ||
Reset Network | This option resets the wired or wireless print server. You must reset the print server to allow any changes to the network settings to take effect. | |
User menu item: | Main Menu > NETWORK  | |
Related ZPL command(s): | ~WR | |
SGD command used: | device.reset | |
Printer web page: | ||
