1. US Home Page
  2. US Home Page
  3. ZQ610 Plus / ZQ620 Plus / ZQ630 Plus User Guide
  4. Introduction
  5. Components
  6. Control Panel
  • ZQ610 Plus/ZQ620 Plus/ZQ630 Plus User Guide
Control Panel

Control Panel

The ZQ600 Plus Series printers are equipped with a keypad control panel, a color LCD graphical user interface, and two multipurpose buttons. The LCD interface allows easy display and selection of many printer functions. Some features of the LCD interface include:
  • A color, non-touch LCD display supporting a 288x240 pixel viewable area.
  • View the display in both room light and nighttime conditions.
  • Capable of displaying colored text and images.
  • To save power, the display dims after a configurable timeout.
Control Panel
1
Printer status bar
Indicates the status of several printer functions.*
2
Navigation bar
Displays user-selectable options.
3
OK
 button
Selects or confirms what is shown on the display.
4
POWER
button
The
POWER
 button turns the printer on and off. It also puts the printer in Sleep mode and wakes it from Sleep.
Normal Boot-Up Behavior
  • Press
    POWER
    to turn on the printer.
  • When
    POWER
    is released, the power ring blinks as the printer boots up.
  • When the boot-up sequence is complete, the power ring stops blinking and remains steadily lit. The color of the power ring depends on the charge status.
Sleep Mode LED Behavior
  • Pressing
    POWER
    for less than 3 seconds puts the printer into Sleep mode.
  • During Sleep mode, the
    POWER
    slowly pulses either Green, Amber, or Red, depending on whether the printer is charging successfully.
Shutdown Behavior
  • Press
    POWER
    for approximately 3 seconds to turn the printer off.
  • SHUTTING DOWN appears on the display before the printer shuts down.
5
FEED
button
Press
FEED
to advance a blank label or a software-determined length of journal media.
6
ARROW
buttons
The
UP ARROW
and
DOWN ARROW
change the parameter values. The
LEFT ARROW
and
RIGHT ARROW
navigate to the left and right.
7
LEFT SELECT
 button
Execute the commands shown directly above them in the display.
RIGHT SELECT
 button
8
Display
Shows the printer's current status and allows the user to navigate the menu system.
* Only icons relevant to the current printer status display.