1. DS4678 Quick Reference Guide
  2. Connecting to a Host
  • DS4678 Quick Reference Guide
Connecting to a Host

Connecting to a Host

Connect the cradle to a host device. This enables the
DS4678
 to share scan data and configuration information with the host.
  1. Connect the host to the cradle.
    Go to the host type section (USB, RS-232, Keyboard Wedge, or IBM) for a diagram illustrating the connection.
  2. Pair the scanner by inserting it into the cradle. The scanner indicates a successful pairing with a low/high beep.
  3. Ensure the cradle detects the correct host type.
    • If the cable automatically detects the correct host type, the scanner is ready for use.
    • If the cable fails to detect the correct host type, scan the relevant barcode in the host type section.