1. SM72 Integration Guide
  2. Electronic Article Surveillance (EAS)
  3. EAS Parameters
  4. EAS Operating Modes
  5. Sensormatic Auto Mode
  • SM72 Integration Guide
Sensormatic Auto Mode
View content for :
Platform:

Sensormatic Auto Mode

This mode depends on the Scan Enable Time value the scanner reads from the Sensormatic ScanMax Pro control box, set by Sensormatic during installation.
  • If the Scan Enable Time equals 0 seconds or 30 seconds, the scanner operates in Sensormatic Scan Enable Interlock Mode.
  • If the Scan Enable Time is set from 1 second to 29 seconds, tag deactivation is active following a barcode decode, and remains active until this timer expires.
More than one tag can be deactivated during this time.
Sensormatic Auto Mode (0)