Set Lengths for Matrix 2 of 5
View content for :
Platform:

Set Lengths for Matrix 2 of 5

L1
Parameter #
619
(SSI #F1h 6Bh)
L2
Parameter #
620
(SSI #F1h 6Ch)
This parameter set lengths for Matrix 2 of 5.
The length of a code refers to the number of characters (for example, human-readable characters), including check digit(s) the code contains. Set lengths for Matrix 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range.  The default is
4 to 55
.
The maximum range is 0-80.
When setting lengths, enter a leading zero for single-digit numbers.
Scan one of the following barcodes to select a length option:
  • One Discrete Length - Decode only Matrix 2 of 5 symbols containing a selected length.
  • Two Discrete Lengths - Decode only Matrix 2 of 5 symbols containing either of two lengths.
  • Length Within Range - Decode Matrix 2 of 5 symbols with a specific length range.
  • Any Length - Decode Matrix 2 of 5 symbols containing any number of characters within the scanner’s capability.
Select lengths using barcodes in Numeric Barcodes. To correct an error or change the selection, scan Cancel.
For example:
  • To decode only Matrix 2 of 5 symbols with 14 characters, scan Matrix 2 of 5 - One Discrete Length, and then scan 1, 4.
  • To decode only Matrix 2 of 5 symbols containing either 2 or 14 characters, scan Matrix 2 of 5 - Two Discrete Lengths, and then scan 0, 2, 1, 4.
  • To decode Matrix 2 of 5 symbols containing between 4 and 12 characters, scan Matrix 2 of 5 - Length Within Range, and then scan 0, 4, 1, 2.
Matrix 2 of 5 - One Discrete Length
Matrix 2 of 5 - Two Discrete Lengths
*Matrix 2 of 5 - Length Within Range (Default:
4 to 55
)
Matrix 2 of 5 - Any Length