1. SP20 Product Reference Guide
  2. Getting Started
  3. Mounting the SP20 to a Stand
  • SP20 Product Reference Guide
Mounting the SP20 to a Stand

Mounting the
SP20
 to a Stand

Mount the
SP20
 on its stand and connect it to a host device. The hands-free scanner's angle can be adjusted to suit your scanning requirements.
  1. Align the mounting rails of the stand with the mounting rails on the bottom of the
    SP20
    .
  2. Slide the stand's mounting rails into the
    SP20
     until the mounting rail's edge is flush with the scanner housing.
    Scanner slides onto stand rails.
  3. Connect the host cable to the scanner's host port.
    Cable inserts into the host port.
  4. Connect the host cable to your host device.
    The scanner powers on.
  5. Adjust the stand's angle to suit your scanning requirements.
    The stand adjusts from -14° to +30°.