1. ET40/45 Presentation Stand User Guide
  2. Getting Started
  3. Mounting the Presentation Stand
  • ET40/ET45 Presentation Stand
Mounting the Presentation Stand

Mounting the Presentation Stand

Use the Desktop Mount Plate to secure the Presentation stand to a desktop.
  1. Place the mounting plate on the desktop with the three tabs facing up.
  2. Install four wood screws.
  3. Align the front of the stand base with the front of the mounting plate.
  4. Lower the stand onto the mounting plate.
    The mounting plate tabs fit inside the square cutouts on the bottom of stand.
  5. Slide the stand base forward slightly onto the mounting plate.
  6. Install two M3x5 screws to secure the stand base to the mounting plate.